Why Your Old Jewellery Tests Lower Purity Than Expected
Your old gold jewellery tested at 20K or 21K instead of the expected 22K. Why does this happen? The 7 most common reasons - and what it means for your selling price.

You bring a piece of gold that the family has always called '22K' to the branch. The XRF test comes back at 87% (≈21K). You are confused and perhaps suspicious.
This situation is extremely common with old jewellery, and in most cases, it is not the result of cheating. There are 7 legitimate, well-understood reasons why old gold tests below its expected purity.
At a Glance
| Most common cause | KDM/cadmium solder used in old repairs (pre-2001) |
|---|---|
| Second most common | Jeweller originally sold below-marked purity (pre-BIS mandatory) |
| Does lower XRF mean cheating at the branch? | Almost never - XRF accurately reads what is there |
| What rate do you get? | The rate for the tested purity - not the expected purity |
| Can you dispute it? | Yes - ask for multiple tests at different spots |
| Last Updated | May 2026 |
7 Reasons Old Gold Tests Below Expected Purity
- KDM/Cadmium Solder: Before 2001, most repairs used KDM solder - a cadmium-tin alloy cheaper than gold. Cadmium dilutes the gold% wherever it was used. A 22K piece repaired twice with KDM solder can test at 20–21K.
- Original under-purity at manufacture: Before BIS mandatory hallmarking (June 2021), jewellers were not legally required to verify purity. Some sold pieces at 20–21K purity while calling them '22K'. Without mandatory XRF/hallmarking at purchase, there was no check.
- Mixing gold of different purities: Old jewellery sets were sometimes assembled by combining pieces of different karats. A necklace with 22K gold and an 18K pendant combined might average 21K.
- Repair with lower-karat gold: A repair done with 18K gold on a 22K piece lowers the average purity wherever the repair material is present.
- Surface oxidation or deposits: Heavy surface oxidation can sometimes affect XRF readings slightly - though modern XRF machines are designed to compensate for this.
- Silver solder at join points: Some repairs used silver solder (not gold-based). Silver has lower density and significantly lower value than gold - any silver solder pulls down the gold% reading.
- Internal lac or resin not detected by XRF: Lac filling inside hollow bangles/chains adds weight but no gold value. XRF identifies the gold content of the metal itself - but the presence of lac makes the total weight higher than the gold weight alone.
What to Do If Your Gold Tests Lower Than Expected
- Ask the branch staff to test at multiple spots - the main body, a joining area, a pendant connection
- The spot with the least repair/solder work typically gives the highest reading
- If the reading is significantly below 22K (below 88%), ask for an explanation - which areas tested lower and why
- You can get a second opinion - bring the piece to another branch or certified testing centre
- You are paid for the actual gold content confirmed by XRF - this is the accurate number
Is It the Branch Cheating You?
In the overwhelming majority of cases: no. XRF machines at certified branches are calibrated and cannot easily be manipulated. The reading is what the piece actually contains.
The rare exception: a branch testing at a solder join point specifically (lowest gold area) to undervalue the piece. This is why asking to see the XRF probe location and requesting multiple spot tests matters.
Why Choose Attica Gold Company
Attica Gold Company is ISO 9001:2015 certified with 200+ branches across Karnataka, Tamil Nadu, Andhra Pradesh, Telangana and Pondicherry. Your wait is over.
Ready to sell your gold?
Visit any Attica Gold Company branch - 200+ branches across Karnataka, Tamil Nadu, Andhra Pradesh, Telangana and Pondicherry. Bring your Aadhaar card. Your wait is over.
Related guides
- How to Sell Old Gold Jewellery Without a Bill
- How to Sell Old Gold Jewellery Without Getting Cheated
- Old Gold Buyers Near Me: How to Find the Best Cash for Old Jewellery in Your Area
Frequently Asked Questions
Why did my 22K gold test at only 20K or 21K?
Most commonly: old KDM cadmium solder used in repairs before 2001. Also possible: original manufacture below stated purity, or mixing of gold purities in the piece.
Is the branch cheating me with a lower XRF reading?
In almost all cases, no. XRF accurately reads the gold content. The lower result reflects the actual composition, often due to old solder.
What rate do I receive if my gold tests at 21K instead of 22K?
You receive the 21K rate, which is the rate for 87.5% pure gold. This is less than the 22K rate but reflects what is actually in the piece.
Can I get a second opinion on the XRF reading?
Yes, you can visit another branch or a certified assay centre. The result should be consistent within ±0.5% if the equipment is properly calibrated.
What is KDM solder and why does it reduce purity?
KDM solder contained cadmium, a cheaper metal used in gold repairs before 2001. It was banned by BIS but its use in old pieces is widespread.
How do I know if my piece was repaired with KDM solder?
There is no visual indicator. XRF testing at the join points will typically show cadmium content if KDM solder was used.
Is old gold worth less per gram than new gold?
Only if it tests at lower purity. If an old piece tests at 91.6% (22K), it receives the same rate as new 22K gold.
Continue reading
Related insights

Selling Gold for Your Business: Process, Tax & What to Consider
Using personal gold to fund business expenses or working capital is a centuries-old practice in India. Whether it is a cash flow emergency, a new machinery purchase, or seed capital for a startup, gold remains one of the fastest ways to raise funds outside…
Read more
How Much Does the Gold Rate Actually Change in a Week?
How much does India's gold rate typically move in a week? Historical weekly volatility data, the events that cause big moves, and how to use this for smarter timing decisions.
Read more
Selling Gold After Retirement: Tax, Process & What to Consider
Retirement often brings accumulated gold - jewellery, coins, and biscuits held for decades - and the question of whether to sell. For many retirees, gold represents a significant portion of their wealth.This guide covers the tax angle (often more favourable…
Read more